Fiberglass stitched mat is made of chopped fiberglass strands in a certain length, then freely put and stitched together with polyester tissue or carbon fiber tissue by polyester yarn. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in pultrusion pipes and tanks, FRP boat, insulation panels, anode tubes, auto parts, bath tubes etc, suitable for pultrusion, filament winding, RTM, hand lay-up processes.
基本数据
General Data
规格型号
Code
质量
Weight (g/m2)
短切丝
Chopped strand
(g/m2)
PET无纺布
Polyester tissue
(g/m2)
碳纤维毡
Carbon tissue
(g/m2)
含水率%
Moisture
Content
浸透速度
Wet speed
(≤S)
EMK250
250
250
-
-
≤0.2
≤60
EMK300
300
300
-
-
≤0.2
≤60
EMK300/C20
320
300
-
20
≤0.2
≤60
EMK300/N45
345
300
45
-
≤0.2
≤60
EMK380
380
380
-
-
≤0.2
≤60
EMK380/C20
400
380
-
20
≤0.2
≤60
EMK380/N45
425
380
45
-
≤0.2
≤60
EMK400
400
400
-
-
≤0.2
≤60
EMK400/C30
430
400
-
30
≤0.2
≤60
EMK400/N45
445
400
45
-
≤0.2
≤60
EMK450
450
450
-
-
≤0.2
≤60
EMK450/N45
495
495
45
-
≤0.2
≤60
EMK600
600
600
-
-
≤0.2
≤60
Remarks:
Roll width: Standard width in 1200mm, 1270mm, and other sizes depends on customer’s real needs, available in 200mm to 3200mm.
Packing: Fiberglass stitched mat is usually rolled in a paper tube with inner diameter 76mm. The roll is warped with plastic film, then put into carton. Lay the rolls horizontally, and can be loaded on pallets and bulk in container.
Storage: The product should be stored in a cool, water-proof area. It is recommended that the room temperature and humidity be always maintained at 15℃ to 35℃ and 35% to 65% respectively. Please keep the product in its original packaging before being used, avoiding moisture absorption.