Chopped strand mat is made of fiberglass chopped strands bonded with powder or emulsion binder uniformly. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in boat building, automotive, cooling towers, bathroom accessories, anti-corrosion pipes etc, suitable for hand lay up, filament winding, press molding forming processes.
基本数据
General Data
规格型号
Code
质量
Weight (g/m2)
粘结剂
Binder type
可燃物%
L.O.I
含水率%
Moisture content
拉伸强力T. Strength (N)
纵向Vertical
横向Horizontal
EMC100
100
Powder/Emulsion
4.0-12.0
≤0.2
≥80
≥80
EMC120
120
Powder/Emulsion
4.0-12.0
≤0.2
≥80
≥80
EMC150
150
Powder/Emulsion
4.0-12.0
≤0.2
≥100
≥100
EMC200
200
Powder/Emulsion
4.0-12.0
≤0.2
≥100
≥100
EMC225
225
Powder/Emulsion
2.0-8.0
≤0.2
≥100
≥100
EMC300
300
Powder/Emulsion
2.0-8.0
≤0.2
≥120
≥120
EMC380
380
Powder/Emulsion
2.0-8.0
≤0.2
≥120
≥120
EMC450
450
Powder/Emulsion
2.0-8.0
≤0.2
≥150
≥150
EMC600
600
Powder/Emulsion
2.0-8.0
≤0.2
≥150
≥150
Remarks:
Roll width: Standard width in 1040mm, 1270mm, and other sizes depends on customer’s real needs, available in 200mm to 3200mm.
Packing: Fiberglass chopped strand mat is usually rolled in a paper tube with inner diameter 76mm. The roll is warped with plastic film, then put into carton. Lay the rolls horizontally, and can be loaded on pallets and bulk in container.
Storage: The product should be stored in a cool, water-proof area. It is recommended that the room temperature and humidity be always maintained at 15℃ to 35℃ and 35% to 65% respectively. Please keep the product in its original packaging before being used, avoiding moisture absorption.